Easy Ways to cut and shape Glass!

There are many people who step into the field of scientific glass blowing however they just quit within days. Well, it isn’t as tough as it seems so if you learn in a proper way, you can simply improve your skills. The basic fact about this field is to possess sound knowledge about the tools that are used in the whole process. The quartz glass can be shaped with the help of carbon that is highly heat resistant. Besides, the quartz scientific glass blowing is the procedure that makes it possible to make a desired shape of the glass. So, basically, you should be aware of all the steps that are crucial in the whole process:

  • Use 4mm Thick Glass for Practice!

The beginners who aren’t adept enough should start their practice by cutting 3 to 4mm thick glass. When the thickness of glass exceeds from 4mm, it becomes hard to break and so you’ll have to put extra effort. Always make sure to cut a glass that is not large in size because a little mistake can make the whole glass useless.

  • Collect all the Vital Tools!

You’ll require collecting the vital tools without which, the cutting of glass won’t be possible. So, mark these tips in your list:

  • Glass Cutter
  • Lubricant or Oil
  • A smooth and flat workspace
  • Measuring Tape
  • A scale for straight or angled cutting

Step 1:

First of all, it is important to sharpen the glasscutter so you won’t have to face any difficulty while cutting. A sharp cutter minimizes your effort and so you’ll be able to get a smooth cut. The wooden-handled cutter is best to use.

Step 2:

In the second step, you will have to use the glass cutting oil. A few drops of oil would be enough to smoothen up the cutting procedure. Using oil in excessive quantity can make it difficult for you to handle the process. So, you should try to complete this procedure with the help of a few drops only.

Step 3:

In the third step, the glass is placed on the flat surface and then you should try to mark the points from where you actually need to cut the glass. Well, the scale would also prove helpful for cutting the glass exactly the way you want. More on, after cutting, the glass blowing procedure will prove helpful enough to give a shape to the glass.